|
|
Post by p_rod on Feb 27, 2016 18:53:01 GMT -5
altroach...
Paul and I had to go to Academy Sports today and we looked at the Igloo coolers they had there.
We think if you made one a bait bucket you would do very well.
And getting rid of the O2 would definitely be a plus too. Most folks don't realize it but when those tanks are FULL, they can be quite dangerous if you ever let the tank fall over where the valve could be broken off. Talk about a runaway torpedo! I've seen it with my own eyes too. It was impressive.....
So go for it....and keep us posted.
I really like the idea...if I was a bait guy I'd do it...
Cheers!
Pat
|
|
|
|
Post by packman on Feb 27, 2016 20:26:42 GMT -5
I use the 7 gal Gatorade cooler for a bait tank, which works well for me. It is shorter and larger diameter than the 5 and 10 gal cooler...so not as top heavy. It fits well in my slayer and have a wired 12 volt stern light mounted to it. I will try and get some pics tomorrow.
|
|
|
|
Post by percfish on Feb 28, 2016 11:01:29 GMT -5
I used a 5 gallon water cooler for a season. My biggest complaints were high center of gravity and poor lid closure. Now I use a 5 gallon bucket/ frabill lid in a mad frog gear crate with rails or a 15 gallon low round tank for keeping shad.
|
|
|
|
Post by atlroach on Mar 9, 2016 10:12:49 GMT -5
I used a 5 gallon water cooler for a season. My biggest complaints were high center of gravity and poor lid closure. Now I use a 5 gallon bucket/ frabill lid in a mad frog gear crate with rails or a 15 gallon low round tank for keeping shad. Happen to have a pic of the 15 gallon in your kayak? How is the additional weight? I'm about to bite the bullet and pick up a bigger bait tank. I'm going to end up selling my current tank and O2 system. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 11, 2016 7:48:38 GMT -5
|
|
|
|
Post by atlroach on Apr 4, 2016 11:49:56 GMT -5
After a lot of debate, I ended up on the 12 Gallon Bait Jacuzzi from Concept Plastics for the following reasons: - The ability to keep shad, trout and herring without them piling up in the corner.
- Weight - 15.3lbs
- Low Height - 18 1/2" dia. X 14"H
- Insulated - Internal Foam Insulation to keep the water cool.
- Replaceable Filter System - Keeps scales out of their gills and debris out of the water.
- Cost - $218 w/o tax
- Battery powered for no need for Oxygen which is a pain on my side of town.
- Made in Eastanollee, GA and can be picked up.
 Will be here the 18th just in time for camp and paddle. |
|
|
|
Post by klag on Apr 4, 2016 11:54:27 GMT -5
Very cool! I can't wait to hear how it performs in action!
|
|
|
|
Post by kdog on Apr 4, 2016 18:26:24 GMT -5
Very nice!
|
|
|
|
Post by bigmoebbq on Apr 6, 2016 18:22:08 GMT -5
So what do you guys use if you carry a milk crate full of tackle and stuff? Thinking I may try live bait soon, just not sure where I would fit it on my yak. Except way back by the rudder, which would be a challenge to get.
|
|
|
|
Post by klag on Apr 6, 2016 19:26:54 GMT -5
You really don't need to bring too much with ya when using live bait. You can put your bucket in the milk crate, and instead of all that stuff - downsize to a small container with a spare pack of hooks, weights, swivels, leader line etc. You can use a fanny pack or something similar.
I carry a small container that has a stringer, spare terminal tackle, pliers, nail clipper, knife, sun screen, extra Flexits, spare top water lure etc. That sits in front of me in an easy to reach place.
I'll go snap a pic.
|
|
|
|
Post by klag on Apr 6, 2016 19:41:02 GMT -5
This has everything I need for the day on the water. If I'm crappie fishing, I'll throw a bunch of extra crappie stuff in there that day. If trout fishing, I'll throw a bunch of extra trout lures and spinners in there that day, etc. etc. I keep it up by my feet in an easy to access place.  |
|
|
|
Post by atlroach on Apr 6, 2016 20:00:47 GMT -5
|
|
|
|
Post by klag on Apr 6, 2016 20:07:44 GMT -5
That's pretty cool! My crate is too small for that - but my kayak has plenty of room for that larger size crate!
|
|
|
|
Post by packman on Apr 6, 2016 20:27:31 GMT -5
Looks like a good idea. Unless you have a very stable yak... I don't think I could reach for much other than bait and 2 front rods. Jim Native Slayer 14.5 Old Town Pack Canoe |
|
|
|
Post by atlroach on Apr 14, 2016 11:51:51 GMT -5
Look what showed up earlier than expected:  Need to add some no slip pad to the bottom and wire it up. |
|
|
|
Post by FROGSLAYER on Apr 14, 2016 12:35:34 GMT -5
Looks like a nice size for your kayak!
|
|
|
|
Post by atlroach on Apr 14, 2016 14:44:21 GMT -5
Looks like a nice size for your kayak! Honestly about the same weight and size for as my old tank Paul has. Fits a PA very well. |
|
